Air Leaks & Caulking

In addition to sealing air leaks, caulking can be used to prevent water leaks. You can caulk around faucets, ceiling fixtures, water pipes, drains, bathtubs, and other plumbing fixtures, which will prevent water damage inside and outside your home. Learn more about caulking.

Blanket Insulation

Proper insulation of your home will provide resistance to heat flow, reduce heating and cooling costs, and improve comfort. Blanket insulation is the most common and widely available type of insulation. It comes in the form of batts or rolls and consists of flexible fibers, most commonly fiberglass. Learn more about this and other types of insulation.

Ceiling Fans

Consider installing ENERGY STAR® certified ceiling fans in your home, which are 60% more efficient than conventional fan/light units. If you use air conditioning to cool your home, a ceiling fan will allow you to raise the thermostat setting about 4°F with no reduction in comfort. Learn more about using fans for cooling.

Concrete Block Insulation

If your home has visible concrete blocks in the foundation, there are several ways to insulate them. You can install insulation directly over the surface of the blocks either on the exterior or interior of the foundation walls. Placing insulation on the exterior has the advantage of containing the thermal mass of the blocks within the space, which can moderate indoor temperatures. Learn more about this and other insulation materials.

Doors

Your home’s exterior doors can contribute to air leakage and wasted energy. Weatherstripping can reduce energy losses and air leakage; however, replacing your doors may be a good investment. New ENERGY STAR® qualified doors have better insulation properties, allowing them to hold heat in during winter and keep it out during summer, which dramatically reduces energy loss and saves you money. When choosing new doors, consider their energy performance ratings specific to the local climate and your home’s design.

ENERY STAR® Light Fixtures

Consider replacing light fixtures, such as recessed lights, with cutting edge ENERGY STAR® certified models. Such fixtures use 90% less energy than traditional incandescent bulb models, and they last 15 times longer. You will even find features such as dimming on some indoor models and automatic daylight shut-off and motion sensors on outdoor models. Learn more about ENERGY STAR® certified light fixtures.

EV Charger - Garage

If you already own an Electric Vehicle (EV) or are thinking about investing in one, consider adding an EV charger in your garage. A 240V, Level 2 wall-mounted charger will give you a faster charge to help you get the most out of your EV and will sufficiently power EVs for longer commutes. Learn more about EV charging at home.

Electronics

Purchase energy-efficient products, like an ENERGY STAR® certified television. Consider using an advanced power strip to reduce “vampire loads” in your home. Explore more energy efficient options for appliances and electronics.

Fireplaces

Did you know that traditional fireplaces are one of the most inefficient heat sources you can use? Open fireplaces draw in as much as 300 cubic feet per minute of heated room air for combustion, then send it straight up the chimney. Consider a high-efficiency fireplace insert to increase the heat efficiency of an older fireplace. Learn more energy-saving tips for fireplaces.

If you have an older wood-burning stove, you may benefit from upgrading to a new, EPA-certified wood- or pellet-burning appliance that is more efficient, cleaner burning, and powerful enough to heat most average-sized homes. Learn more about wood and pellet heating.

Foam Board or Rigid Foam Insulation

Foam boards (rigid panels of insulation) can be used to insulate almost any part of your home. They are very effective in exterior wall sheathing, interior sheathing in basement walls, and in specific places such as attic hatches. These panels provide good thermal resistance (up to 2 times greater than most other insulating materials of the same thickness) and reduce heat conduction. Learn more about this and other types of insulation.

Heating

To reduce heating costs, purchase energy-efficient heating systems and operate them efficiently. By upgrading to an energy-efficient furnace combined with proper equipment maintenance, insulation, air sealing, and using a programmable thermostat, you can save about 30% on your energy bill while reducing environmental emissions. Be sure to:

• Clean or replace furnace filters regularly, as recommended

• Clean warm-air registers, baseboard heaters, and radiators as needed; make sure they're not blocked by drapes, carpeting, or furniture

• Set your programmable thermostat as low as is comfortable in the winter and lower when you're away from home or sleeping.

Learn more tips for energy-efficient home heating.

Indoor Air Quality

For improved indoor air quality in new homes, the EPA has created Indoor airPLUS. This program provides additional specifications, requirements, and protections to maximize indoor air quality in new construction. If building a new home is in your future, learn more about Indoor airPLUS.

Kitchen Appliances

Upgrade your kitchen with ENERGY STAR® certified appliances to save water, money, and time! For instance, ENERGY STAR® certified dishwashers will boost water temperature to 140°F so your dishes will be disinfected, and you will spend less time and use less water at the sink—nearly 5,000 gallons per year. Learn more about ENERGY STAR® certified appliances.

Laundry Room

Consider upgrading your laundry appliances with ENERGY STAR® models. ENERGY STAR® certified clothes washers use about 25% less energy and 33% less water than regular washers. ENERGY STAR® certified clothes dryers use about 20% less energy than conventional models. Learn more about ENERGY STAR® certified appliances.

Loose-Fill and Blown-In Insulation

For retrofits and locations where it would be difficult to install other types of insulation, consider loose-fill and blown-in insulation. This type of insulation consists of small particles and can conform to any space without disturbing structures or finishes. Learn more about loose-fill and blown-in insulation.

Loose-Fill and Blown-In Insulation

Radiant Barriers

If you live in a hot climate, consider installing radiant barriers in your attic, which will reduce summer heat gain and save you 5% to 10% on cooling costs. These barriers consist of a highly reflective material that reflects radiant heat rather than absorbing it. Radiant barriers are more effective when cooling air ducts are located in the attic. Learn more about radiant barriers.

Radiant Floor Heating

Install an energy-efficient radiant floor system. These liquid-based heating systems use little electricity, eliminate duct loss, and avoid the spread of allergens in the air. Learn more about radiant heating systems.

Sprayed-Foam and Foamed-In-Place Insulation

To create an insulating barrier, consider sprayed-foam or foamed-in-place insulation. Sprayed-foam insulation works particularly well in an attic because it expands to fill the gaps, cracks, and crevasses. Some installations can yield a higher R-value than traditional batt insulation for the same thickness. You can also fill small cavities with pressurized cans of foamed-in-place insulation to reduce air leakage in cracks or openings. Learn more about sprayed-foam and foamed-in-place insulation.

Sustainable Flooring

When replacing floors, opt for sustainable flooring, such as bamboo. Bamboo is a plant that is highly renewable compared to traditional tree-sourced wood floors. Bamboo can also regenerate itself, and it is harvested by hand, making it an environmentally friendly flooring choice. If bamboo is not your style, consider reclaimed or sustainably harvested wood.

Thermostats

Control the temperature settings in your home with a programmable or smart thermostat. You can save as much as 10% per year on heating and cooling by turning your thermostat down 7°–10°F for 8 hours a day in the fall and winter; turn it up in the spring and summer. Learn more about programmable thermostats.

Ventilation

Proper ventilation is important for creating an energy-efficient home. Spot ventilation helps remove indoor air pollution and moisture at its source with the use of localized exhaust fans, such as those above kitchen ranges and in bathrooms. Whole-house ventilation systems provide controlled, uniform ventilation throughout a house. These systems use one or more fans and ductwork to push out stale air and supply fresh air to the house. Learn more about home ventilation systems.

Water Heating

Water heating is the second largest energy expense in your home. The average household spends $400-$600 a year on water heating. To decrease your water heating bills, try these tips:

• Use less hot water.

• Turn down the thermostat on your water heater.

• Insulate your water heater and pipes.

• Buy an energy-efficient model.

• Consider a tankless water heater if your home uses 41 gallons or less of hot water daily.

Learn more about water heating.

WaterSense: Bathroom Faucets

Upgrade your bathroom sink faucets to WaterSense labeled models to conserve water and save money on your water bill. These models use a maximum of 1.5 gallons per minute, which can reduce a sink's water flow by 30% or more from the standard flow of 2.2 gallons per minute. Learn more about WaterSense products for your bathroom.

WaterSense: Showerheads

Replace shower heads with WaterSense-labeled models, which can save 4 gallons of water every time you take a shower. The WaterSense label ensures that these products provide a shower experience that is equal to or better than conventional showerheads on the market. Learn more about WaterSense Showerheads.

WaterSense

Fix leaky faucets! According to the EPA, approximately 5% to 10% of US homes have easy-to-fix leaks that drip away 90 gallons of water a day or more. Replace old faucets and aerators with WaterSense-labeled models, which can save 700 gallons of water per year. Also consider replacing traditional, clock-based irrigation controllers with a WaterSense-labeled irrigation model to save up to 15,000 gallons of water annually. Learn more about Water Sense.

Weatherization

Caulking and weatherstripping are effective air-sealing techniques to cut heating and cooling costs and increase comfort. Caulk cracks and openings between stationary house components, such as window frames. Weatherstripping can be applied to components that move, such as doors and operable windows. Learn more about air sealing your home.

Window Coverings

To improve the energy efficiency of your windows:

• Install insulating, tight-fitting window shades that can be raised or lowered.

• Close window coverings at night and open them during the day to let in sunlight and warmth.

• Apply low-e film on windows to keep heat from escaping.

• Choose medium-colored draperies with white plastic backings to reduce heat gain.

• On the exterior of your home, consider adding awnings on south- and west-facing windows for shade.

Learn more about energy-efficient window coverings.

Windows

Consider replacing your home’s windows with ENERGY STAR® qualified windows, which can save you as much as 7% to 15% or more on annual household energy bills. Consider storm windows, for a budget-friendly option. Adding skylights can provide your home with daylighting and improve ventilation. Learn more about updating or replacing windows.

Cool Roofs

A cool roof reflects sunlight and efficiently emits heat. Standard roofs can reach temperatures of 150°F or more in the summer sun. By installing a cool roof, you can lower the temperature of your roof by up to 50°F, and you will save energy and money by using less air conditioning. Learn more about cool roofs.

Energy-Efficient Landscaping

A well-designed landscape not only can add beauty to your home, but also can reduce your heating and cooling costs. A well-placed tree, shrub, or vine can deliver effective shade, act as a windbreak, and reduce your energy bills. Carefully positioned trees can save up to 25% of the energy a typical household uses. Learn more about energy-efficient landscaping.

Exterior Awnings

Exterior awnings can significantly reduce solar heat gain on south-and-west facing windows. Choose an awning material that is water-repellant, opaque, tightly woven, and light-colored to reflect sunlight. Retractable awnings are a great option because they can be rolled up in the winter to allow the sun to warm your home. Learn more about awnings and other energy-efficient windows coverings.

Hybrid Electric Systems

A small "hybrid" electric system that combines home wind electric and home solar electric technologies can offer advantages over a single system. Since the peak operating times for wind and solar systems occur at different times of the day and year, hybrid electric systems are more likely to produce power when you need it. Learn more about hybrid electric systems.

Small Wind Electric Systems

If you have enough wind resource in your area, and the situation is right, small wind electric systems are one of the most cost-effective home-based renewable energy systems – with zero emissions and pollution. Learn more about small wind electric systems.

Solar Lighting

An easy way to save money on electricity costs is to install outdoor solar lights. These maintenance-free lights are powered 100% by solar energy. Outdoor solar lights include pathway light sets, wall-mounted lamps, freestanding lamp posts, as well as security lights. Before installing any of these, be sure that the placement area receives adequate sunlight. Learn more about outdoor solar lighting.

Solar Panels

Consider installing a home solar electric system. Solar panels are a reliable, environmentally friendly source of energy to power your home and can save you money for years to come. Learn more about planning a home solar electric system.

Swimming Pool Heating

You can reduce the cost of heating your swimming pool by installing a high-efficiency or solar heater, using a pool cover, managing the water temperature, and using a smaller pump less often. Learn more about swimming pool heating.

Water-Smart Irrigation

Timing is key! Being aware of when to water and how much to water is important for water conservation. Consider installing a WaterSense labeled in-ground irrigation system to reduce overwatering. Learn more about WaterSense outdoors.

Water-Smart Landscaping

By using regionally appropriate, low water-using native plants in your landscape design, you can achieve an attractive, functional, and water-smart landscape. Other tips to conserve water include keeping your soil healthy, aerating your yard, adding mulch to protect plants and retain water, and minimizing steep slopes to avoid unnecessary runoff and erosion. Learn more about water-smart landscaping.